Maintenance of building film

1、 Do not move the glass within 3 days after the installation of the window film.

2、 Do not scrub the film glass with water within 15 days after the film is installed.

3、 Do not use suction cups to hang or use adhesives to fix anything on the film coated glass, and do not paste adhesive decorations on the window film.

4、 Spray the surface of the window membrane lightly and evenly with a cleaning agent that does not contain ammonia, and then gently dry the glass with a clean, soft cotton cloth or soft paper towel. The cotton cloth and paper towel often need to be wrung dry. The pure external alcohol contained on the cotton cloth/paper towel will quickly dissolve huge stains and greasy fingerprints. If the stain is not cleaned, spray the cleaning solution again, scrape the window film horizontally from top to bottom with a soft rubber wiper until it is dry, and then dry the edge of the glass film with a towel.

5、 When adhesive tape, instant post or decal paper is used on the window film, the glue or glue left behind by these materials should be removed. The contaminated area can be gently scrubbed with soft clean cotton cloth dipped with acetone (nail polish remover) to quickly and completely remove the glue left on the glass film. A small amount of acetone will not damage the polyvinyl acetate film, but it can immediately dissolve and completely evaporate the glue and most paint.

6、 Do not use a hard wiping plate, brush or abrasive cloth to clean the glass film.